Bearings Tapered Roller Bearings NN3964K

B:36 mm; r, r1,2 min.:0.6 mm; F:42 mm; Mass inner ring:0.12 kg; d:35 mm;

ba:34.131 mm; P150°:26.7 kN; da:68.263 mm; Mass pillow block:16.3 kg; R2:21.431 mm; Stabilizing ring:SR-16-13; Cap bolt recommended tightening torque:149.1 N·m; L:330.2 mm; h:31.75 mm; H2:31.75 mm;

Sealed Speed Rating n3:23000 rpm; Oil Speed Rating Open/Shielded n2:43000 rpm; Basic Dynamic Radial Load Rating C:3250 N; B:7.00 mm; Accessories:One Shield; D:22.0000 mm; d:7.000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Static Radial Load Rating Co:1360 N;

B:36 mm; r, r1,2 min.:0.6 mm; F:42 mm; Mass inner ring:0.12 kg; d:35 mm;

B1:95.301 mm; Mass adapter sleeve assembly:4.4 kg; G:129.692 mm; Lock washer:W 26; Lock nut:AN 26; Sleeve:S 26x4.3/8; B4:25.4 mm; B:22.479 mm; d3 max.:171.577 mm; d:130 mm;

Calculation factor e:0.2; d2 ≈:419 mm; Fatigue load limit Pu:360 kN; K:12 mm; da min.:398 mm; Calculation factor Y0:3.2; Basic static load rating C0:5000 kN; b:22.3 mm; Da max.:542 mm; Mass bearing:110 kg;

H2:60.325 mm; ba:61.119 mm; S:4.763 mm; H1:152.4 mm; Da:250 mm; PosiTrac Plus contact element:2 x B10724-122; Mass pillow block:68 kg; P90°:149 kN; da:127 mm; Labyrinth ring:2 x LOR 123;

ba:34.131 mm; P150°:26.7 kN; da:68.263 mm; Mass pillow block:16.3 kg; R2:21.431 mm; Stabilizing ring:SR-16-13; Cap bolt recommended tightening torque:149.1 N·m; L:330.2 mm; h:31.75 mm; H2:31.75 mm;

Sealed Speed Rating n3:23000 rpm; Oil Speed Rating Open/Shielded n2:43000 rpm; Basic Dynamic Radial Load Rating C:3250 N; B:7.00 mm; Accessories:One Shield; D:22.0000 mm; d:7.000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Static Radial Load Rating Co:1360 N;

Sealed Speed Rating n3:23000 rpm; Oil Speed Rating Open/Shielded n2:43000 rpm; Basic Dynamic Radial Load Rating C:3250 N; B:7.00 mm; Accessories:One Shield; D:22.0000 mm; d:7.000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Static Radial Load Rating Co:1360 N;

ba:34.131 mm; P150°:26.7 kN; da:68.263 mm; Mass pillow block:16.3 kg; R2:21.431 mm; Stabilizing ring:SR-16-13; Cap bolt recommended tightening torque:149.1 N·m; L:330.2 mm; h:31.75 mm; H2:31.75 mm;

H2:60.325 mm; ba:61.119 mm; S:4.763 mm; H1:152.4 mm; Da:250 mm; PosiTrac Plus contact element:2 x B10724-122; Mass pillow block:68 kg; P90°:149 kN; da:127 mm; Labyrinth ring:2 x LOR 123;

Tolerance housing:H7; d:12 mm; B:10 mm; Specific dynamic load factor K:25 N/mm²; B1:3 mm; Mass bushing:0.016 kg; Permissible sliding velocity v min.:0 m/s; D:18 mm; Coefficient of friction µ min.:0.08; Tolerance shaft:e7;